Sciact
  • EN
  • RU

Effect of hydrothermal treatment on the physicochemical characteristics of Pd/C composites prepared via pyrolysis of sawdust impregnated with palladium nitrate Научная публикация

Журнал Russian Chemical Bulletin
ISSN: 1066-5285 , E-ISSN: 1573-9171
Вых. Данные Год: 2016, Том: 65, Номер: 11, Страницы: 2618-2627 Страниц : 10 DOI: 10.1007/s11172-016-1627-1
Ключевые слова birch sawdust; carbon support; hydrothermal treatment; palladium catalyst; pyrolysis
Авторы Lokteva E.S. 1,2 , Klokov S.V. 1,2 , Golubina E.V. 1,2 , Maslakov K.I. 1,2 , Trenikhin M.V. 2,3 , Ivakin Y.D. 1 , Likholobov V.A. 2,3
Организации
1 M. V. Lomonosov Moscow State University, Build. 3, 1 Leninskie Gory, Moscow, 119992, Russian Federation
2 Institute of Hydrocarbon Processing, Siberian Branch of the Russian Academy of Sciences, 54 ul. Neftezavodskaya, Omsk, 644040, Russian Federation
3 Omsk Scientific Center, Siberian Branch of the Russian Academy of Sciences, 15 prosp. Marksa, Omsk, 644024, Russian Federation

Информация о финансировании (1)

1 Российский научный фонд 14-33-00018

Реферат: Palladium supported on carbon (Pd/C) catalysts (0.55–0.65 wt.% of Pd) were synthesized by pyrolysis of birch sawdust under inert atmosphere proceeded by prolonged impregnation of sawdust in aqueous solution of palladium nitrate. In some cases, hydrothermal treatment (HT) of the pristine sawdust was conducted to modify the specific surface area of the final carbon material applied as a catalyst support. Based on low-temperature nitrogen adsorption technique, it was postulated that HT of sawdust in the liquid phase increases. while HT in the gaseous phase decreases the specific surface area of Pd/C. The obtained catalysts contained Pd particles (size ranged from 2 to 10 nm) both coated and not coated with carbon shell as evidenced by XPS and TEM techniques. The synthesized Pd/C composites provide high conversion of chlorobenzene and high selectivity in respect to benzene in hydrodechlorination reaction performed in a flow fixed-bed reactor in the presence of H 2 . XPS data for Pd/C composites tested in the catalytic reaction indicate their high resistance to HCl. A minor part of metal Pd was found to transform into PdCl 2 and PdO.
Библиографическая ссылка: Lokteva E.S. , Klokov S.V. , Golubina E.V. , Maslakov K.I. , Trenikhin M.V. , Ivakin Y.D. , Likholobov V.A.
Effect of hydrothermal treatment on the physicochemical characteristics of Pd/C composites prepared via pyrolysis of sawdust impregnated with palladium nitrate
Russian Chemical Bulletin. 2016. V.65. N11. P.2618-2627. DOI: 10.1007/s11172-016-1627-1 WOS Scopus РИНЦ OpenAlex
Оригинальная: Локтева Е.С. , Клоков С.В. , Голубина Е.В. , Маслаков К.И. , Тренихин М.В. , Ивакин Ю.Д. , Лихолобов В.А.
Влияние способа предварительной гидротермальной обработки на физико-химические свойства Pd/C-композитов, получаемых пиролизом пропитанных раствором нитрата палладия опилок
Известия Академии наук. Серия химическая. 2016. №11. С.2618-2627. РИНЦ
Даты:
Поступила в редакцию: 15 июн. 2016 г.
Опубликована в печати: 1 нояб. 2016 г.
Опубликована online: 17 мая 2017 г.
Идентификаторы БД:
Web of science: WOS:000401572700010
Scopus: 2-s2.0-85019260594
РИНЦ: 31033506
OpenAlex: W2616129228
Цитирование в БД:
БД Цитирований
Scopus 5
Web of science 5
OpenAlex 5
Альметрики: