Possibilities of Regulating the Texture Parameters of Porous Carbon Materials Obtained by Alkaline Dehydrochlorination of Polyvinyl Chloride with Subsequent Heat Treatment of Forming Polyvinylenes

Possibilities of Regulating the Texture Parameters of Porous Carbon Materials Obtained by Alkaline Dehydrochlorination of Polyvinyl Chloride with Subsequent Heat Treatment of Forming Polyvinylenes Научная публикация

Журнал

Protection of Metals and Physical Chemistry of Surfaces
ISSN: 2070-2051 , E-ISSN: 2070-206X

Вых. Данные

Год: 2021, Том: 57, Номер: 4, Страницы: 806-810 Страниц : 5 DOI: 10.1134/S2070205121040134

Ключевые слова

polyvinyl chloride, polyvinylenes, dehydrochlorination, mechanical activation, carbonization, porous carbon materials

Авторы

Kryazhev Yu.G. ¹ , Anikeeva I.V. ¹ , Gulyaeva T.I. ¹ , Arbuzov A.B. ¹ , Trenikhin M.V. ¹

Организации

1	Center for New Chemical Technologies, BIC, Boreskov Institute of Catalysis, Siberian Branch, Russian Academy of Sciences

Информация о финансировании (1)

Министерство науки и высшего образования Российской Федерации

0239-2021-0004

Synthesis of porous carbon materials has been carried out in two ways—by chemical and mechanochemical dehydrochlorination of polyvinyl chloride in the presence of alkali and subsequent two-stage heat treatment of the obtained polyvinylenes (carbonization up to 400°C and carbon dioxide or alkaline activation at a temperature of 850—900 and 800°C, respectively). The products obtained were studied by transmission electron microscopy and low-temperature nitrogen adsorption. It is shown that, depending on the synthesis conditions, carbon materials after activation have a developed specific surface area of 350–1100 m2/g and specific pore volume 0.3–0.47 cm3/g with a variable contribution of micropores from 30 to 85%. Thus, the effectiveness of the chosen approach to the controlled synthesis of porous CMs from PVC is confirmed.

Kryazhev Y.G. , Anikeeva I.V. , Gulyaeva T.I. , Arbuzov A.B. , Trenikhin M.V.
Possibilities of Regulating the Texture Parameters of Porous Carbon Materials Obtained by Alkaline Dehydrochlorination of Polyvinyl Chloride with Subsequent Heat Treatment of Forming Polyvinylenes
Protection of Metals and Physical Chemistry of Surfaces. 2021. V.57. N4. P.806-810. DOI: 10.1134/S2070205121040134 WOS Scopus РИНЦ OpenAlex

Кряжев Ю.Г. , Аникеева И.В. , Гуляева Т.И. , Арбузов А.Б. , Тренихин М.В.
Возможности регулирования текстурных параметров пористых углеродных материалов, получаемых щелочным дегидрохлорированием поливинилхлорида с последующей термообработкой образующихся поливиниленов
Физикохимия поверхности и защита материалов. 2021. Т.57. №4. С.444-448. DOI: 10.31857/S0044185621040136 РИНЦ OpenAlex

Поступила в редакцию:	6 февр. 2020 г.
Принята к публикации:	8 февр. 2021 г.
Опубликована в печати:	27 авг. 2021 г.

Web of science:	WOS:000694837400018
Scopus:	2-s2.0-85114858074
РИНЦ:	46573537
OpenAlex:	W3201259941

Пока нет цитирований